SILA / Shipping guides
How to calculate CBM for cartons and pallets
Calculate cubic metres correctly, then tell the carrier what the number does not describe.
Use packed external measurements
Measure length, width and height after packing. Convert centimetres to metres before multiplying: 60 × 40 × 50 cm becomes 0.60 × 0.40 × 0.50 m. The result is 0.12 m³ per carton. Twenty identical cartons total 2.4 m³.
Calculate unlike groups separately
For ten cartons at 0.12 m³ and two crates at 1.20 × 0.80 × 1.00 m, the total is 1.2 + 1.92 = 3.12 m³. Keep both groups in the request. Averaging measurements can conceal a crate that will not fit through the vehicle opening.
Include the pallet and overhang
A palletised load must be measured around its complete outside envelope. Include the base, wrapping and protrusions. If stacked cartons are already measured as one loaded pallet, do not add the carton volumes again to the same total.
Do not turn CBM into a universal price
CBM describes volume, not safe weight capacity or guaranteed billable volume. Providers may price using weight, floor space, minimum charges or other agreed rules. State gross weight and stacking limits alongside the calculation, and ask how the quotation is measured.
Common questions
Can I use the product’s catalogue dimensions?
Only if they match the actual packed unit. Packaging, pallet height and protective space can change the transport dimensions.
References and further reading
This is operational guidance, not an official tariff or a carrier quotation. Confirm current requirements and service availability for your actual goods and route.